RTEC P Series filters feature an polyester fiber/phenolic resin construction that produces an extremely rigid pore structure.
This construction allows the filter to withstand extremes of viscosity and temperature without compression or collapse.
In addition, a true graded density construction allows complete utilization of the filter’s depth, with coarse particles captured in the outer zones and finer particles captured nearer the core.
Rigid polyester fiber/phenolic resin construction prevents unloading even at high differential pressures
Grooved outer surface increases surface area for longer on-stream life
Available in a wide range of removal effciencies from 1 to 100 microns
Available with optional end configurations for installation in most housings
No metal or plastic cores for easier disposal
Broad chemical compatibility
|
Product Series |
Retention Rating (microns) |
Length (inches) |
End Configuration |
Gasket or O-Ring |
|
RTEC P Series |
1 5 10 25 50 75 100 |
–9.75 –10 –19.5 –20 –29.25 –30 –39 –40 |
P Double Open End P2 226/Flat Single Open End P3 222/Flat Single Open End P7 226/Fin Single Open End P8 222/Fin Single Open End N None |
B Buna-N E EPDM N None S Silicone T Teflon encap. Viton (O-Rings only) V Viton |
