For cost driven applications, choose the PME Series to deliver absolute efficiency in a broad range of particle sizes.
This all polypropylene filter is suitable for a wide range of applications and carries all the needed industry certifications to satisfy most critical requirements.
In addition, the slightly smaller diameter ensures easy retrofit in installed housings designed to accept depth filters.
The pleated construction provides high dirt holding capability and low pressure drops.
Micron ratings from 0.2 to 50 μm — Broad application range
2.55" diameter to fit installed housings with ease
“Absolute” Efficiency — Rated at 99.98% (Beta 5000)
Optimized surface area — High dirt holding for long service life
Fixed pore structure — Eliminates dirt unloading at maximum differential pressure
Polypropylene Construction — Inert to many process fluids
Various Gasket/O-Ring materials — Compatible with a variety of fluids
Manufactured in continuous lengths up to 40 inches
Filter Type |
Retention Rating (microns) |
Nominal Length (inches) |
End Configuration |
Gasket or O-Ring |
PME Series |
0.2 5 0.45 10 1 25 2.5 50
|
–5 –20 –9.75* –30 –10 –40
|
P Double Open End P3 222/Flat Single Open End P8 222/Fin Single Open End
|
B Buna-N E EPDM S Silicone T Teflon encap. Viton (O-Rings only) V Viton
|
*Available only for DOE (P) configuration