ZTEC P Sterilizing Grade membrane cartridges are validated for complete bacterial retention to yield product sterility in biopharmaceutical final filtration applications.
The naturally hydrophilic and low protein binding characteristics of polyethersulfone membrane ensure maximum transmission of active ingredients making it ideal for a wide range of pharmaceutical and biological liquid applications, including the filtration of therapeutics, vaccines, antibiotics, bulk pharmaceutical and other critical biotechnology products.
The double-layer PES 0.2 micron membrane filters are manufactured in a cleanroom environment, and integrity tested before shipment to assure consistent performance and quality.
Manufactured in an ISO Class 7 Cleanroom Environment
100% flushed with ultrapure DI water
Meets ASTM Standards for Sterility
Repeatably Steamable/Sanitizable
100% Integrity tested prior to release
Pore size, lot and serial number are stamped on each filter element for identification and traceability
Complete validation guide available
Filter Type |
Retention Rating (microns) |
Nominal Length (inches) |
End Configuration |
Gasket or O-Ring |
ZTEC P Series |
0.2 |
–10 –20 –30 –40 |
P2 226/Flat Single Open End P3 222/Flat Single Open End P7 226/Fin Single Open End P8 222/Fin Single Open End
|
B Buna-N E EPDM S Silicone T Teflon encap. Viton (O-Rings only) V Viton
|