ZTEC E microelectronics grade cartridges represent Graver’s latest development in ultrapure water filtration technology.
The filters are inherently hydrophilic and contain no added surfactants or wetting agents that could contaminate pure and ultrapure water streams.
The PES membrane offers superior flow characteristics, high contaminant capacity and consistent removal of submicron particles.
The cartridges exhibit rapid rinse-up to 18 MΩ-cm resistivity and single digit ppb levels of TOC.
Manufactured, flushed, tested and packaged, in an ISO Class 7 Cleanroom Environment.
Filters are 100% fushed with 18 MΩ-cm DI water and integrity tested.
Resistivity rinse-up to 18 MΩ-cm and single digit ppb TOC levels with minimal throughput.
Available in a variety of end cap/adapter configurations to fit all industry-standard housings.
Pore size, lot and serial number are stamped on each filter elementfor identification and traceability.
Complete quali cation guide available.
|
Filter Type |
Retention Rating (microns) |
Nominal Length (inches) |
End Configuration |
Gasket or O-Ring |
|
ZTEC E Series |
0.03 0.1 0.2 0.45 |
–5 –9.75* –10 –20 –30 –40 |
P Double Open End P2 226/Flat Single Open End P3 222/Flat Single Open End P7 226/Fin Single Open End P8 222/Fin Single Open End AM Single Open End, Internal O-Ring NPC Double Open End, Internal O-Ring
|
B Buna-N E EPDM S Silicone T Teflon encap. Viton (O-Rings only) V Viton |
*Available only for DOE (P) configuration
